Latest or all posts or last 15, 30, 90 or 180 days.
2024-04-27 04:18:50
877-865-7002
Today’s Deal Zone Items... Handpicked deals...
$1999 $998
SAVE $1001

$500 $400
SAVE $100

$2499 $1999
SAVE $500

$5999 $4399
SAVE $1600

$2499 $2099
SAVE $400

$5999 $4399
SAVE $1600

$999 $849
SAVE $150

$1049 $849
SAVE $200

$680 $680
SAVE $click

$300 $300
SAVE $click

$5999 $4399
SAVE $1600

$4499 $3499
SAVE $1000

$999 $999
SAVE $click

$799 $699
SAVE $100

$1199 $899
SAVE $300

Connect and charge all of your devices through a single Thunderbolt or USB-C port.

Canon EOS R5 Firmware Update v1.4.0

As any aside, has anyone out there found the Canon dual pixel raw format useful on regular basis?

The brand-new Canon EOS R5 I received on loan from B&H was still at firmware version 1.3.1, so I had to update the Canon EOS R5 firmware.

Kudos to Canon for doing it right, and not the brain-dead “root kit” method as with Sony and some others. That is, you just put the firmware file on the SD card, and go to the menus and it does the rest. That is the way it should be done.

Canon EOS R5

Firmware Version 1.4.0 incorporates the following fixes and enhancements:

  • Adds support for outputting 8K/30p/10-bit video signals for ProRes RAW recording to ATOMOS's Ninja V+ recorder* via HDMI.
    * If you have any questions about ATOMOS products, please contact ATOMOS directly.
    * Please note that the recorder may become hot.
  • Adds support for movie recording when the camera is connected to the CN-E18-80mm T4.4 L IS KAS S or CN-E70-200mm T4.4 L IS KAS S EF cinema lenses.
    * Still photography shooting is possible however performance is not guaranteed.
    * Movie shooting in vertical position is possible however performance is not guaranteed.
    * External power supply is required for AF operation during servo zoom operation. When there is no external power supply, AF operation is activated only when the servo zoom is not in use.
  • Adds simultaneous movie recording capability on card 1 and card 2, however RAW movies and RAW(Light) movies cannot be recorded simultaneously on card 1 and card 2.
  • Adds support for the VPG 400 (Video Performance Guarantee Profile), a standard based on the CFexpress 2.0 specification.
  • Improves operation stability when using the RF400mm F2.8 L IS USM and RF600mm F4 L IS USM.
  • Fixes an issue in which, during HDMI connection, if the camera's screen turns off, a zebra pattern is displayed via the HDMI output.
  • Fixes an issue in which sufficient image stabilization effects may not be attained immediately after the start of shooting.

Firmware Version 1.4.0 is for cameras with firmware up to Version 1.3.1. If the camera's firmware is already Version 1.4.0, it is not necessary to update the firmware.


View all handpicked deals...

Seagate 22TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR)
$500 $400
SAVE $100

diglloyd Inc. | FTC Disclosure | PRIVACY POLICY | Trademarks | Terms of Use
Contact | About Lloyd Chambers | Consulting | Photo Tours
RSS Feeds | X.com/diglloyd
Copyright © 2022 diglloyd Inc, all rights reserved.